주요 콘텐츠로 건너뛰기

Why do I keep shorting out the starter solenoid?

Put brand new starter in my car, worked great for about two days then it wouldn't start, so I replaced the battery cables thinking that was the problem nope, not it, at first I didn't think about the starter cause it brand new, so I tried to jump it maybe it's the battery nope come to find out it's the solenoid so replaced it again brand new starter and solenoid and again worked for two days then just quit someone mentioned to me that I may have a low or high voltage short somewhere any ideas where this could be?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Check to see if any of the wires going to the solenoid are missing insulation. In most cars, the wires going to the starter are always grouped really tight and very close to the engine block. It doesn't take much movement for a slightly bare wire to short things out in this situation.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

andres ray 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 14

30일 전: 47

전체 시간: 3,811