주요 콘텐츠로 건너뛰기
수리 커뮤니티 가입 - 계정 만들기

Chevrolet/쉐보레가 제조한 승용차 및 트럭 수리 설명서 및 지원.

Brake light switch circuit

My 89 Chevy S10 pickup trucks brake warning lamp is flashing ten times I did the jumping of the terminals and got the same thing it is the brake light switch circuit what things should I try to replace to fix this problem

이 질문에 답하기 저도 같은 문제가 있습니다

좋은 질문입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Check your ABS if you have one, the box might unhook. Q Are the brakes working fine?

And the wheel speed sensor is one problem i see everywhere, ABS is important too. Tell me what you find.

Try this; First with the truck off and in park on a level ground release the ebrake and turn the key to run does the light come on for two seconds then remail light? Start the truck up is the light still on? If not then the ebrake switch may be bad. Check out a post here if you havent : https://www.cargurus.com/Cars/Discussion...

Jamie explains it well, although yes it is an old post, see if it does help.

이 답변이 도움이 되었나요?

점수 1

댓글 4개:

The light only comes on when the truck is started

Only on a start-off? Or when the ABS is active, too?

When it is active to

Try replace your ebrake since thats the answer you need, ABS seems fine check back on it later.

댓글 달기

답변을 추가하세요

Robert devall 영원히 감사할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 224