Hard drive replacement recognition

Question

iMac Intel 20" EMC 2105 and 2118

Model A1174과 2 GHz Core Duo 또는 Model A1207과 2.16 또는 2.33 GHz Core 2 Duo

212 질문 전체 보기

Carter @carter76974

평판: 1

2

게시일: 2017년 1월 24일

옵션

Hard drive replacement recognition

Just replaced the HDD with a known working one. It is not being recognized.

When I start up from a dock unit has no problems, but does not show the newly installed drive. Unit works fine from the external dock (drive).

I have apple service manual and have viewed you replacement video. From what I can tell the drive is properly installed and everything plugged in properly. So what am I missing, or where should I be looking?

Not my first rodeo… and as you know these units are a bear!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

선택된 답변

mayer @mayer

평판: 685.4k

MacHale Enterprises

3.4k

1.1k

2.6k

게시일: 2017년 1월 24일

옵션

Looks about this vintage:

Apple iMac "Core 2 Duo" 2.16 20-Inch Specs

Identifiers: Late 2006 - MA589LL - iMac5,1 - A1207 - 2118

The drive has to be formatted. Boot up from your original system installation disk, go to the second page pull down menu to Utilities > Disk Utility and format it. Then install a system.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 8개:

Carter here, I am sorry perhaps I was not clear enough about the facts.

The drive is already a formatted, loaded working drive (one pulled from my Mac Pro). It is not a formatting problem nor a system problem. it is a hardware snafu, and the drive is properly "plugged in". (I have formatted and installed hundreds of drives)

Carter 의 2017년 1월 25일

The drive may not be backward compatible. What drive are you using? Did I get the correct machine?

mayer 의 2017년 1월 25일

Yes, you have the right machine. It is not about the drive's compatibility,it will work from my external dock. Better odds in the wiring or another unseated plug, or, or, or…..

Carter 의 2017년 1월 25일

Did you put a system on it?

Pre-Installed MacOS: X 10.4.7 (8K1106) Maximum MacOS: X 10.7.5*

What was going on with the old drive?

mayer 의 2017년 1월 25일

I used a working OSX 10.7.5, I am not sure about the old one. It has been in storage for a few years. That being said, the iMac works just fine when it boots from my ext. dock. Again, it is not about the 'drive', it is about the rest of the unit. (i.e. wiring, plugs etc.) As I have it back together now (except for the 'cover', I would pose the question before removing the screen and such and therefore know where to focus my search.

Carter 의 2017년 1월 25일

댓글 3개 더보기

댓글 달기

Carter here, I am sorry perhaps I was not clear enough about the facts.

The drive is already a formatted, loaded working drive (one pulled from my Mac Pro). It is not a formatting problem nor a system problem. it is a hardware snafu, and the drive is properly "plugged in". (I have formatted and installed hundreds of drives) — Carter
The drive may not be backward compatible. What drive are you using? Did I get the correct machine? — mayer
Yes, you have the right machine. It is not about the drive's compatibility,it will work from my external dock. Better odds in the wiring or another unseated plug, or, or, or….. — Carter
Did you put a system on it?

Pre-Installed MacOS: X 10.4.7 (8K1106) Maximum MacOS: X 10.7.5*

What was going on with the old drive? — mayer
I used a working OSX 10.7.5, I am not sure about the old one. It has been in storage for a few years. That being said, the iMac works just fine when it boots from my ext. dock. Again, it is not about the 'drive', it is about the rest of the unit. (i.e. wiring, plugs etc.) As I have it back together now (except for the 'cover', I would pose the question before removing the screen and such and therefore know where to focus my search. — Carter

iMac Intel 20" EMC 2105 and 2118

Hard drive replacement recognition

답변 1개

귀하의 답변을 추가하세요