์ฃผ์š” ์ฝ˜ํ…์ธ ๋กœ ๊ฑด๋„ˆ๋›ฐ๊ธฐ

2014๋…„ 9์›” 19์ผ์— ์ถœ์‹œ๋œ ์ด 4.7โ€ ์Šคํฌ๋ฆฐ iPhone์€ iPhone 6 Plus์˜ ์ž‘์€ ๋ฒ„์ „์ž…๋‹ˆ๋‹ค. ๋ชจ๋ธ ๋ฒˆํ˜ธ A1549, A1586 ๋ฐ A1589๋กœ ์‹๋ณ„๋ฉ๋‹ˆ๋‹ค.

iPhone 6 not detected by PC after disassembly

After getting error 4013 and try many times without success, I loose the phone to service, the board, after light clean with spirit, the phone does come up and shows itunes logo, but could not be detected at all, I still try another charging point, the story goes the same.

์ด ์งˆ๋ฌธ์— ๋‹ตํ•˜๊ธฐ ์ €๋„ ๊ฐ™์€ ๋ฌธ์ œ๊ฐ€ ์žˆ์Šต๋‹ˆ๋‹ค

์ข‹์€ ์งˆ๋ฌธ์ž…๋‹ˆ๊นŒ?

์ ์ˆ˜ 0

๋Œ“๊ธ€ 2๊ฐœ:

How's the Lightning socket look on the board?

์˜

it's okay and I even try to place it in another panel, it worked, and the other board connect, which means the connection problem is from the logic board not the lighting socket

์˜

๋Œ“๊ธ€ ๋‹ฌ๊ธฐ

๋‹ต๋ณ€ 1๊ฐœ

Was the board water damaged? Try a cleaning with isopropyl alcohol, if it shows up the iTunes screen then iTunes should detect it. Try DFU mode: http://www.iphonehacks.com/put-iphone-in...

์ด ๋‹ต๋ณ€์ด ๋„์›€์ด ๋˜์—ˆ๋‚˜์š”?

์ ์ˆ˜ 0
๋Œ“๊ธ€ ๋‹ฌ๊ธฐ

๋‹ต๋ณ€์„ ์ถ”๊ฐ€ํ•˜์„ธ์š”

Bukhari Musa Ayuba ์˜์›ํžˆ ๊ฐ์‚ฌํ•  ๊ฒƒ์ž…๋‹ˆ๋‹ค.
์กฐํšŒ ํ†ต๊ณ„:

์ง€๋‚œ 24์‹œ๊ฐ„: 0

์ง€๋‚œ 7์ผ: 0

์ง€๋‚œ 30์ผ: 1

์ „์ฒด ์‹œ๊ฐ„: 79