기기를 수리하세요 커뮤니티 상점

Repair information for the 4th generation iPad. Released November 2, 2012. Model numbers: A1458, A1459, and A1460.

408 질문 전체 보기

옵션

iPad stuck in recovery mode after LCD replacement

So after replacing the LCD and power/volume buttons on my iPad 4 my iPad will bootup but default to recovery mode. I have tried all the obvious solutions to fix the problem like the iTunes update route and power button/home button combination route with no success. The screen appears as normal and looks completely fine. I am wondering if anyone has had any similar issues. Could it be a screw I put in the wrong spot, or could I have damaged a small part on the board that I can get fixed? Either way I am hoping for a solution and I greatly appreciate any help. Thank you!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0

댓글 2개:

Some context here: i do not want to restore it because it has too many priceless memories. this is not a recent problem, i did this repair 6 months ago but i am just now losing patience and searching for help. Please!!

의

Have you tried doing a iTunes restore? Sometimes the iPad just needs to be restored if the update fails with error code -26 for example.

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

You mentioned you replaced the power button and volume buttons. It could be that cable is being depressed and something is causing the device to enter recovery mode. Its a pain, but if you can get back into the device and re-seat those cable connections on the logic board that could solve the issue, verify the buttons click freely and aren't spongy at all before trying to replace them again.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Donny Cara 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 247