After reassembling my PSP Go the Start & Select buttons won't work

Question

PSP Go

Complete repair manual for the PSP Go, including battery upgrade and display repair instructions.

89 질문 전체 보기

joel c @joelc29953

평판: 47

1

게시일: 2010년 12월 2일

옵션

After reassembling my PSP Go the Start & Select buttons won't work

After i disassembled and rereassembled my PSP Go to fix my power switch; i used the PSP Go Teardown guide from this website, and now both the Start & Select buttons won't work anymore; and they were working before then.

so i tried taking my psp go apart and putting it back together again while going over the teardown guide thinking i over looked something, anyone have an idea of what that might be?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 3

댓글 1개

This is how you replace it. https://imgur.com/gallery/JRRsJku

Player 의 2021년 8월 13일

댓글 달기

답변 3개

선택된 답변

Aram @aram15281

평판: 300

8

11

게시일: 2011년 1월 10일

옵션

Look at the 2nd picture of step 9 in the PSP Go teardown. There is a cable that connects the buttons to the main board, it could be loose.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 2개:

Here's a direct link to the page Aram is mentioning. PSP Go Teardown

Ryan 의 2011년 1월 13일

thanks man, that's exactly what the issue was, i didn't see that cable cause it was hidden by joystick's ribbon cable.

joel c 의 2011년 1월 28일

댓글 달기

This is how you replace it. https://imgur.com/gallery/JRRsJku — Player
Here's a direct link to the page Aram is mentioning. PSP Go Teardown — Ryan
thanks man, that's exactly what the issue was, i didn't see that cable cause it was hidden by joystick's ribbon cable. — joel c

Kat @kat78890 평판: 1 · Answer 1 · 2013-05-16T09:42:59-07:00

Kat @kat78890

평판: 1

게시일: 2013년 5월 16일

옵션

I have the same issue, except my cable is in. Any ideas? I just had sound issue which was caused by bad fuse, which i replaced and now works but SELECT/START button doesn't

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 달기