iPhone not charging, "this accessory may not be supported."

Question

iPhone 6

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

anthonriis @anthonriis

평판: 13

2

1

게시일: 2017년 2월 21일

옵션

iPhone not charging, "this accessory may not be supported."

I have this iphone 6 motherboard that works almost fine, exept it wan't recognise the charging cable, and the message pops up: "This accessory may not be supported".

I have tried "millions" of different cabels, originals too, but it dosn't work.

I can charge it by turning the phone of while it is plugged in, but that is no good...

I have tried with diferent ports too, dosn't make a difference.

I have tried updating/restorering the phone, didn't help.

Could it be fixed by jailbreaking the phone and mabye run it on an older ios?

Could it be the charging chip (U2)?

Thanks for your help :)

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 2개

Elijah @elijahsrook001 평판: 217 9 4 2 · Answer 1 · 2017-02-21T15:26:46-07:00

가장 유용한 답변

Elijah @elijahsrook001

평판: 217

9

4

2

게시일: 2017년 2월 21일

옵션

one thing that may cause your iPhone to reject your charging cable is that your charging socket/hole/connector may be full of dirt, like lint, or dust. a good way to clean this out is with a toothpick, carefully. alternate scraping the dirt out and blowing in the charger port to loosen the dirt. dirt in the charger hole may cause a poor connection, including the error message

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

I tried conecting a completly new socket to the motherboard, didn't help.

The problem must be software related or some hardware failure on the motherboard

anthonriis 의 2017년 2월 21일

댓글 달기