주요 콘텐츠로 건너뛰기

A 12.2-inch "prosumer" tablet released in February 2014. Powered by a custom version of Android 4.4 KitKat.

40 질문 전체 보기

My tablet will not turn on after some DIY repairs

My tablet had screen flickering issues and after some research, I decided to unplug the battery and reconnect. Little did I know that the battery connector on the motherboard breaks off super easy. So then my only option was to re-solder the pins to the connectors, which I did but it still won't turn on. Some of the connectors won't accept the solder so I super-glued them, but still nothing. Any advice would be great, I called UbreakIfix and they said the base cost of repair would be over $300, which I cannot afford. Should I call Samsung? Thank you for any help.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

luke.puller , Very big mistake using the super glue for trying to make a electrical connection as it could do the opposite and become an isolator. Probably best to just take it into a good local computer/cell phone repair shop and have them take a look and estimate repair. The whole board can be purchased for $120.00 and can probably be found used for a lot less if need be. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

http://www.ebay.com/itm/OEM-Samsung-Gala...

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

luke.puller 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 101