Apple released the slimmed-down, buffed up iPad Air on November 1, 2013 in a choice of Space Gray or Silver. It packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

502 질문 전체 보기

smart cover lock ipad from back side

Hi, I have a problem after replacing the touch the iPad Air crashes even when I stretch in the back the Smart Cover, I thought it was because I no longer have the original home button. But I tried to connect only non-touch lcd and no home button and the problem remains, the iPad will block even when the cover and lying in

The back. I don't know how to fix it. Everyone says that both the home button but I don't think

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1


Just dont use the smart cover.

의 답변

Very kind to reply. But I'd be curious to understand then I issue

의 답변

Not sure sorry

의 답변

의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

1개의 답변

Most likely the home button. Something similar happens on the iPad Air 2. It has a small patch with 4 points that you have to solder off and solder on to the new digitizer/LCD assembly. Otherwise the Smart Cover won't work.

You could troubleshoot it by disconnecting the home button and then run the Smart Cover on the back of the iPad. If it still shuts off then it could be caused by the magnets on the side under the edge next to the LCD. But as said, most likely the home button.

해당 답변은 도움이 되었습니까?

점수 0


But where are the magnets? For that the screen comes off even without the home button plugged in so I think key is not the problem

의 답변

If I remember right, they are under the edge of the chassi.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Luca Ciclisti 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 9

전체 시간: 342