주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3531 질문 전체 보기

Bottom half of screen doesn't respond correctly

I have an iPhone 5s that doesn't respond correctly on the bottom half of the screen. It works but when using the keyboard the input is wrong, for instance if I touch F, I might get G or G and F. It is not the digitiser, the screen has been replaced with one that was working perfectly on another 5s so it is something within the phone itself, any ideas?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

A few things to consider here:

  • The logical thing to suspect is the screen. If you are confident it is good (can you put it back on the original device it came from to confirm?), then move on to the next item
  • There may be a partial connection only so check the digitizer connector. Also, it should have a little black foam on top of the metal plate on the flex (look at this picture). That allows it to stay firmly connected under the bracket. Don't underestimate the importance of this.
  • You could have a problem on the logic board with the Touch IC. If the phone was bent in the past or dropped often over it's lifetime, this is a possibility. This would require a micro-soldering repair.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

I definitely sure it's not the screen. The screen that came with it was the exact same way. So it's going to be one of the other 2. I'll open it up tomorrow and see if I can see what the problem is. Thanks.

댓글 달기

귀하의 답변을 추가하세요

Mary Ellen 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 71