주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

Do you have to buy cover for the logic board?

I don't know if you need covers for the bare logic board

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

What do you mean by this question?

What are you trying to do?

댓글 달기

답변 2개

가장 유용한 답변

Do you have the Logic Board exposed on the iPhone? If so then Yeah I would get it covered a static charge could kill the Logic Board and it could easily be killed. If you have the Logic Board out and exposed then I would place it in an Antistatic Bag to preserve it chances are that if its been exposed for any type of long term its already been damaged in one way or the other. Hope that helps..

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

I think hes reffering to inside the phone. Plus static is something i find rather rare as i have ram and gpus just sitting around and they work with no issues

RAM isnt as potent to do damage to. If you have read anything through ATLAS then you would know to put everything that has Boards or where circuitry runs in an Anti Static Bag.

댓글 달기

If it never came with covers for it which i dont think it does no you dont need them as i dont even thing you ca but them and it would be stupid too

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

so you have a bare logic board that you're trying to install on a phone?

I don't think not having covers is going to cause you an issue, but what I do is place electrical tape or heat tape over the circuits where the heat shields would normally be and leave it at that

댓글 달기

귀하의 답변을 추가하세요

Isaiah Aguirre 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 52