주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

Fingerprint issue in setup

Please see the following pictures.

Fingerprint works in certain parts of the setup.

Any solution?

I did restore the software.

Block Image

Block Image

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글 8개:

Could you please explain the question a little better. Maybe I can help you

Ok so my iPhone 6S Plus old screen was working fine but sometimes was flickering around the corners, so I decided to change my screen like I did myself because I'm a technician so I tried around 5 screens and I realized those screen were not good quality so today I got another screen so the fingerprint was unable so I disconnect the screen and connected again and works so I went to fingerprint setup to add a fingerprint and it works but in order to complete the setup the next page was blank as you can see the pictures.

Any solution?

@albertoh did you do anything else besides opening your phone and trying to setup the fingerprint? I mean hard reset or something else.

Have you Recover the iPhone through recovery mode.

NOT settings reset ?

If not, I can tell you how to enter recovery mode

댓글 3개 더보기

댓글 달기

답변 1개

how to fix fingerprint gray out on iphone 6?

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Try to replace home button extension flex cable, but use the original home button or it will never work.

댓글 달기

귀하의 답변을 추가하세요

alberto houtmann 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 100