기기를 수리하세요 커뮤니티 상점

MacBook Pro 13" Retina Display, 모델 A1502의 2015년 3월 업데이트는 5세대 Intel Core i5 및 i7 프로세서를 포함하며 Force Touch 트랙 패드를 소개합니다.

1186 질문 전체 보기

옵션

Why back will not seat fully?

Hi - I recently had to open the back of my MacBook Pro 13" Retina A1502 mac and for some reason there is now a bit of flex to the back and my keyboard is not as firm. It is subtle but definitely a difference and keyboard makes a little more noise now.

I have followed screw guide and heard click with connectors in center of back per guide when replacing back.

Any suggestions? Is this just a result of opening and getting a factory "seal" is not possible (hope not)?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 3개

Please tell us your exact model.

의

What guide did you follow?

의

Retina Early 2015 13" - MF841LL/A - MacBookPro12,1 - A1502 - 2835 and the guide i followed was the following:

MacBook Pro 13" Retina Display Early 2015 Lower Case Replacement

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

There should be no difference if you did it correctly. Why did you open it and what did you do. Here's the guide: MacBook Pro 13" Retina Display Early 2015 Lower Case Replacement

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

옵션

The way the keyboard is constructed, it shouldn't have been affected by this repair in any way, that's really weird! The keyboard is held into the frame by 80-some screws and rivets, which you wouldn't have been able to even get near to while following that guide.

The flex on the bottom could be due to those clips, sometimes the two clips in the center of the base will break or won't engage properly.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

M.M 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 65