The water started slowly filling at first just on the sides, trickling out hot water even if I had the cycle on cold. Takes two forever for the tub to fill. I thought I had out smarted it by hooking my cold water up in the hot water hose. Nope. Just prolonged the inevitable. It is doing it again. What can i do to fix this?!
좋은 질문 입니까?
평판: 101.2k
8
172
358
@jmalm87,Jess, Remove hoses from washer and house supply, check for good water pressure from taps and check hoses/screens for blockage. If the water inlet valve defective, the washer could fill very slowly or not let water run at all. Check the fill valve screen if OK, replace the fill valve. See the trouble shooting repair links below. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 6
30일 전: 12
전체 시간: 982
