2.26 또는 2.4 GHz / 흰색 플라스틱 유니바디 인클로저

678 질문 전체 보기

MacBook A1342 won't power on after replacing display

I replaced a defective display (side connectors failed) on my otherwise working MacBook A1342. Ordered a used display assembly and followed the directions here. Now it won't power on, and when I connect to the power adapter I get a solid green light. Followed Apple's troubleshooting procedures with no luck. Any suggestions, anything to look for before I tear this back down? Thanks!

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

1개의 답변

선택된 해법

Check all your connections, mainly the keyboard cable. Plug in the old screen to make sure this isn't causing an issue, although I doubt it. Try running it off of the charger with the battery disconnected too. Did you disconnect the battery whilst working on it, and did you disconnect it with a metal tool? You have possibly shorted something on the board.

해당 답변은 도움이 되었습니까?

점수 3
의견 추가하세요

귀하의 답변을 추가하십시오

Tom 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 31