iPhone 5s home button bracket screws - how to unscrew

Question

iPhone 5s

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

HelpMe @spamcatcher

평판: 1

게시일: 2017년 4월 8일

옵션

iPhone 5s home button bracket screws - how to unscrew

I can not get the iPhone 5s home button bracket off. I don't know if I'm using the wrong tool, 000 Phillips (purchased off ifixit), or it's just too tight.

The screws do not look like the traditional plus sign in a lot of the photos I've seen online.

Any ideas?

I'm also not sure how to upload photos on this so you all can see what I am dealing with.

Could the screws be stripped?

Here is a photo of what the screws look like.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 1개

Oh wow. Try a larger Phillips and a rubber band between the screw driver and the screw. If rubber band doesn't work a small piece of electrical tape has worked for me in the past.

Jeremy Hopper 의 2017년 4월 8일

댓글 달기

답변 2개

선택된 답변

iMedic @theimedic

평판: 57.5k

iMedic Phone Repairs

18

77

212

게시일: 2017년 4월 8일

옵션

I never use my 000 Kooku driver. It's real nice too. Shiny metallic purple. Rubber gaskets on the handle. Rotating head works much smoother. But it doesn't work. I use my 00 Best driver. Works every time. Does fail from time to time. Bought four of em in my day. Apparently they just straight up don't make a 00 driver over at Kooku

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

Oh wow. Try a larger Phillips and a rubber band between the screw driver and the screw. If rubber band doesn't work a small piece of electrical tape has worked for me in the past. — Jeremy Hopper

Jeremy Hopper @tehhopper 평판: 133 iTech Leavenworth 2 · Answer 1 · 2017-04-08T14:02:36-07:00

Jeremy Hopper @tehhopper

평판: 133

iTech Leavenworth

2

게시일: 2017년 4월 8일

옵션

Hi,

I have done a lot of this particular repair. The 000 Phillips usually does the trick, however, in some instances where my customer has had their screen previously replaced by another repair shop sometimes I run into issues where that repair shop put different screws in. I don't know if this is due to lack of screw management or if it is that repair shops personal choice.

If it were the right screw you wouldn't have any trouble with it being too tight as the screws are too short to screw in too far to avoid damage to the front of the display.

Unfortunately, without knowing for sure I would guess that the issue is that incorrect screws are in the device. You might have to try several sized screw bits and hope for one of them to work.

Good luck.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 달기

iPhone 5s

iPhone 5s home button bracket screws - how to unscrew

Update (04/08/2017)

Update (04/08/2017)

답변 2개

귀하의 답변을 추가하세요