Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus. Identifiable by the model numbers A1549, A1586, and A1589.

4419 질문 전체 보기

My touch id stopped working . How to fix ripped cable?

I have the original lcd shield and home button to iphone i had the screens switched and the repairman ripped the home buttons flex cable from the connector and button itself can i fix it?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
의견 추가하세요
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3개의 답변

선택된 해법

If the home button cable itself is ripped, the only way to have the Touch ID function work again is to have Apple replace it. A replacement home button will give you home button functionality but not Touch ID. If it's just the extension cable that's on the thermal plate that is damaged, that can easily be replaced and will restore home button and Touch ID functionality.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

Thanks. Very helpful

의 답변

의견 추가하세요
가장 유용한 답변

Hi Ty S,

Here is a guide on how to do the replacement. You may have to have the repair done by Apple in order to keep the touchID feature.

해당 답변은 도움이 되었습니까?

점수 3
의견 추가하세요

If the cable was damaged by the one who repaired the phone then have the repair done by that repair guy . Anything I break while repairing a phone I fix as it should be with all repairs . The home button can be replaced but the touch function has to be done by Apple

해당 답변은 도움이 되었습니까?

점수 3
의견 추가하세요

귀하의 답변을 추가하십시오

Ty S 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 1

전체 시간: 124