How to fix black screen on my iPhone 5s after dismantling it?

Question

iPhone 5s

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

Kahwan Eliza @kahwan

평판: 11

1

게시일: 2017년 4월 21일

옵션

How to fix black screen on my iPhone 5s after dismantling it?

OK so I just replaced the battery of my iPhone 5s with the battery I ordered off this site and followed their given guide. Unfortunately after I finished changing the battery and putting everything back like it was before hand I noticed that the screen is only black. I put it on the charger and the phone generates some heat and also when plugged to my computer is activates the iTunes which shows that the phone is on but the screen is just black. Can anyone tell me what went wrong while I was working on the Iphone and is there any possible solutions?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 1개

I don't think it is on because it doesn't vibrate or anything .

Kahwan Eliza 의 2017년 4월 21일

댓글 달기

답변 2개

선택된 답변

iMedic @theimedic

평판: 57.5k

iMedic Phone Repairs

18

77

212

게시일: 2017년 4월 21일

옵션

Double check your connections. It's very possible you don't have the LCD cable in there correctly. It's also possible you damaged it. It's likely getting hot because the digitizer cable is working, but the LCD isn't. Circuits not complete, and the logic board is getting cranky. +1 for doing this yourself. It's not the end of the world if the display is broken, things happen when you do anything the first time

해당 답변은 도움이 되었습니까?

예 아니요

점수 5

댓글 5개:

So it still is a black screen will purchasing a new iPhone 5s LCD Screen and Digitizer from this site (iPhone 5s LCD and Digitizer) an answer to this? Do you know if it will have all the pieces needed to do the repair ? If so then I will purchase this and replace the it, need a new screen anyway this one is scratched.

Kahwan Eliza 의 2017년 4월 23일

If it's not the connection, look in there. Are all the sockets looking good? Both on the board, and on the part. Then yes, a new display is the answer. So even if you skimp, like me, and just get the part, you'll still have everything. You just need to swap the backplate camera and home button. But be careful with that home button. Damage it, lose Touch ID. I don't wanna scare, but be cautious. If you don't do this often, use a hair dryer, and gently with a medium space away, gently heat up the adhesive on the cable, gently pry up, then push the button, from the front, out the back. The little square sticker for the rubber gasket, not a big deal

iMedic 의 2017년 4월 23일

I got my new display today and and replaced it on my new phone. I believe everything went well but my phone is still still just a black screen. It can still connect to iTunes though. I just don't get whats wrong.

Kahwan Eliza 의 2017년 4월 25일

Ok. So when it's on, and you can't see anything, and the display isnt fully closed. Disconnect the home cable safely. And see if there's light coming from the back of the display

iMedic 의 2017년 4월 25일

I don't see any light from the display. I looked threw the area where the home button is and around the phone while I believed it was on. I presume this is bad..

Kahwan Eliza 의 2017년 4월 26일

댓글 달기

I don't think it is on because it doesn't vibrate or anything . — Kahwan Eliza
So it still is a black screen will purchasing a new iPhone 5s LCD Screen and Digitizer from this site (iPhone 5s LCD and Digitizer) an answer to this? Do you know if it will have all the pieces needed to do the repair ? If so then I will purchase this and replace the it, need a new screen anyway this one is scratched. — Kahwan Eliza
If it's not the connection, look in there. Are all the sockets looking good? Both on the board, and on the part. Then yes, a new display is the answer. So even if you skimp, like me, and just get the part, you'll still have everything. You just need to swap the backplate camera and home button. But be careful with that home button. Damage it, lose Touch ID. I don't wanna scare, but be cautious. If you don't do this often, use a hair dryer, and gently with a medium space away, gently heat up the adhesive on the cable, gently pry up, then push the button, from the front, out the back. The little square sticker for the rubber gasket, not a big deal — iMedic
I got my new display today and and replaced it on my new phone. I believe everything went well but my phone is still still just a black screen. It can still connect to iTunes though. I just don't get whats wrong. — Kahwan Eliza
Ok. So when it's on, and you can't see anything, and the display isnt fully closed. Disconnect the home cable safely. And see if there's light coming from the back of the display — iMedic
I don't see any light from the display. I looked threw the area where the home button is and around the phone while I believed it was on. I presume this is bad.. — Kahwan Eliza

William Smith @willfixforfood 평판: 295 3 · Answer 1 · 2017-04-21T18:04:53-07:00

William Smith @willfixforfood

평판: 295

3

게시일: 2017년 4월 21일

옵션

Well you could try taking it apart again and putting it back together.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 달기

iPhone 5s

How to fix black screen on my iPhone 5s after dismantling it?

답변 2개

귀하의 답변을 추가하세요