주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

Bloated battery started pushing off lcd screen

Hello!

Recently i got 3 years old iphone 6 from a friend which started getting problems with it and switched to iphone 7. The problems he was getting were mainly fast battery drain, phone turning off at 60%and screen acting weird from times to times. Because phone was in protection case all the time he hasn't really noticed that screen started kicking off since battery started "growing". Anyways, i have ordered the battery now but am unsure how to propperly remove lcd without damaging it? It seems to me that lcd got loose from the frame on both sides but there is still a corner on the left top where the lcd is holding to the frame. Pictures below for breif idea ;

Block Image

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

That's some pretty decent separation! You can remove the screen as you normally would, but chances are it will separate more from the frame.

Once the new battery is in and the pressure from behind is removed this screen should sit fairly flush. At least in my experience. There will be a little play/squishiness and a possible gap depending on how much it separates during removal, but it wont affect the functionality. If it were me and I were looking to keep the repair as low cost as possible I wouldn't replace the screen. I would just get a case that wraps around the edges and keeps it nice and secure. But really for a high-quality lasting repair should replace the full assembly (or just the frame if you know a good tech) .

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

rokowski 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 10

전체 시간: 1,830