주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2591 질문 전체 보기

Backlight issues 1 week after screen repair.

I have done about 30 different iPhone 6 sceeen repairs last month. Most of them had no issues but about 3 of them have come back with backlight issues. Sent off for motherboard repair and it gets fixed. Any idea as to what may be causing this malfunction of the backlight chip? Customer damage and not being honest?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

are you sure they are backlight issues?

there are horrible copy aftermarket screens getting around that do the same thing work fine then screen goes black with only backlight shining.

combination of home and power button presses sometimes work but more often then not you pop the battery the power cycle phone and it will come on again fine and work until it fails again.

id be leaning more towards a screen not a backlight chip

해당 답변은 도움이 되었습니까?

점수 4

댓글:

My money's on bad aftermarket screens. Never had these before (I'm also using aftermarket from a trusted supplier I've been using for 6 years) and have been doing 6s for about a year at least.

I agree. Double test, and make sure it's not the display. Also I agree, you need to not be using crappy displays because they're cheap and you're trying to save yourself money

Backlight ic chip every single time. Tried 4 sceeens with same issue. No light. Would also try both copy screens TM and original screens as we stock both. No backlight. I then take those screens I tested in that phone and they work. Send off for repair, they replace the touch ic and all good to go with same screen I had on. Once repaired, it's all good and never get a return. Again, same sceeen in phone that had no backlight to begin with if you understand what I am saying. Always works when customer test after repair but then stops later on. It is definitely not the screen itself that is having issues unless the screens are shorting out that chip. TM usually has some great screens that even iFixit use now.

I guess make sure you are ESD safe / hold power button after unplugging battery for 5 seconds? I'm really not sure what else to say. You aren't mixing up the screws in the wrong spots right (Long screw damage)?

댓글 달기

귀하의 답변을 추가하세요

The iPhone Guy 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 91