Skip to main content

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4682 질문 전체 보기

Marks on display after separating glass

Hello

I have a question for people with more experience in LCD separation. Look at the picture in the second link below - there are several marks on a display of an iPhone 6 I have not encountered before, red line and dark spot.

The display was broken after a fall. Here is a picture before separation:

Block Image

http://imgur.com/a/Lmege

And here is a picture after separation:

Block Image

http://i.imgur.com/2uC0v37.png

There were none of those marks before glass separation so I am wondering if this could happen because of an unprofessional separation or is it possible that it just somehow was not visible before (with glass on a display)?

According to the technician words, the dark spot on the bottom right side marks a place when the display is a bit bent - which was not visible with the glass glued on top of the display.

Thank you in advance

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

1개의 답변

선택된 해법

Vertical red line looks like it is on the polariser film you have fitted (they have protective films you remove), along with the black/grey circles. The dark smear in the bottom right is probably where liquid has leaked into the backlight (when you were cleaning the glue), but it is difficult to tell from picture.

해당 답변은 도움이 되었습니까?

점수 5

댓글:

So it means that the technician made possibly something wrong? I was not separating the display, this picture is the only one he sent me.

의 답변

Yes. Tell him to remove the protective film from both sides of the polariser. Smudge is probably backlight panel, when he cleaned the glue it has leaked inside.

의 답변

Thank you. Your explanation with leaked glue sounds more credible than his argument with a bent digitizer. Or is it possible that digitizer could bend after a drop? I believe it would break, not bend.

의 답변

A bent digitiser won't cause that mark, it is where the liquid from cleaning the old glue has leaked into the right side. Most likely the digitiser would break anyway, like you have said

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Mirek 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 109