주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

Restarting after changing battery

I purchased an ifixit replacement battery and tool kit. Replaced my aging battery. All went smoothly. I turned phone on and it seemed okay, then it restarted by itself. It's usable for a few minutes, then it restarts again. I let it cycle this way till the battery percentage displayed 7% and I put it on the charger.

It stayed at 7% for an hour. I restarted the device while still plugged in, now it's stuck at 31% and not charging higher. It is still randomly restarting, although less frequently than when I first changed the battery. Ideas anyone? I'm new to this stuff.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 달기

답변 1개

가장 유용한 답변

According to your responses, the problem should lie within the battery or the power circuit of your phone. If the problem is the battery, you could contact customer service and maybe ask them to send you another one. If the problem lies within your phone battery circuit, you could maybe take it out to a technology repair shop and fix the circuit. I suggest first taking it to a few technology repair shops first to see what is actually broken so you could replace it.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Leo Wells 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 5

전체 시간: 152