메인 콘텐츠로 스킵하기

Announced on September 9, 2015, the iPad Mini 4 maintains the power of an iPad Air 2 in a smaller form factor.

103 질문 전체 보기

New screen turns black

Hello!

So, I've removed the old screen, and battery has been unplugged when removing and inserting the new one. The new lcd/digitizer however turns black after about 10-15 seconds, just about when it's supposed to load the password screen. Tested with the old one again, works fine.

I have not soldered on the old sensor as I wanted to test the replacement screen first and I don't want to void the warranty. Home flex has been transferred.

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

Wondering how much this to do with removing the home button flex, and if any damage caused this

의 답변

Tested first without home flex and then with. Same thing

의 답변

의견 추가하세요

3개의 답변

New screen specification are same as old screen as old screen working find so only issue with new screen. Does new screen is fine or it may be faulty.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

I'm not sure what you mean. If the old one works but not the new it must be the old screen that is faulty? That's my guess, but since I don't have any experience with iPad Mini 4, I thought maybe it's something else.

의 답변

@ipadtransfer your not understanding what the question is? Because your answer is dead wrong!

의 답변

I guess that old screen working fine even after removing new screen. So I just suggest that confirm that new screen is working fine or not. As there is no issue with older screen

의 답변

You said tested with old screen working fine so i said it may be issue with new screen.

의 답변

의견 추가하세요

I would try to find a different screen at a local repair shop and see if they would let you try that one. I'm guessing that its the connector. Have you cleaned all of the connectors? If not I would clean them.

If you have any questions or concerns please comment below!! Thank you!

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

I have the same issue, I replaced the old broken screen with the new one, but when I press the power button the device trying to load for 10-15 seconds then the screen becomes black. If I press the power button for a long time the screen powered on again showing the power off option, but I can't turn it off by pressing the power button again. If I reinstall again the old screen, it is working fine without any issue.

I have checked 4 new screens all of them having the same issue. Should I use specific replacement screen for model no. A1538 to get it work?

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Pwny 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 96