주요 콘텐츠로 건너뛰기

Repair guides and support for the third-generation 5D, a DSLR camera released by Canon in 2012.

14 질문 전체 보기

Replacing Mode Dial on Canon 5DMkIII

The button and metal face plate for the mode dial on my Canon 5DMkIII are missing. I lost them last December while running through the jungle, trying to keep up with a troop of chimpanzees. The dial itself is still intact and I've been able to change the mode by pressing a small pin into the button hole to unlock the dial.

I have a complete replacement dial/button/face plate in hand. Does anyone know how complicated it is to change this out or where I might find detailed instructions. . . . . .or at this point, should I just send it in to a professional for repairs (I have replaced components on a number of other cameras, with good success).

Thanks!

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글:

my canon 5d mark 3 brokened hot sho. if i no how can replese that

my canon 5d mark 3 brokened hot sho. if i no how can replese that

의견 추가하세요

답변 2개

If you have the mode dial cover you can replace it with a little lock tight super glue if it came with the 3m adhesive on the back it will fall off again. I had this same problem. Also you will find a small notch on the mode dial that helps you to align it properly. I hope this helps.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Hi Robert

I have this same problem with my 5dmkiii. Were you able to figure it out on your own?

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Hi anyone found a place where they repair this issue?

의견 추가하세요

귀하의 답변을 추가하십시오

Robert Johnson 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 17

전체 시간: 1,809