Unable to activate Touch ID after housing replacement

Question

iPhone 6

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

Daniel @d4nw8

평판: 43

2

게시일: 2017년 8월 18일

옵션

Unable to activate Touch ID after housing replacement

Hi,

one day ago I replaced my used and damaged IPhone 6 Housing with a new one (not a used one; Bought a new one from ebay in matte Black and Gold). So far so good, but after i reassembled everything, my Touch ID wasn´t working correctly, so did a reboot and i did a soft reset with the hardware keys. After this I got the Message, that it`s "Unable to activate Touch ID".

I also changed the ribbon cable on the back of the metal plate on the Display and tested the old one with another IPhone (it worked)...

I am really confused now, since i didn`t touched the Home Button at all (no need when you don`t change the Display...)

Any recommendations?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 2개

John @g0d 평판: 1 · Answer 1 · 2017-08-29T18:53:54-07:00

John @g0d

평판: 1

게시일: 2017년 8월 29일

옵션

Did you simply change the metal housing, or did you change any of the internal parts (like the logicboard)? Since each home button is paired to the logicboard, replacing either the home button or logicboard will disable Touch ID. If you are still using the original logicboard and home button that are correctly paired, it is possible that you damaged the home button cable.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 1개:

Yes you have to remember that the home button with same phone only works not other.Maxium chances is that the home buttom flex is damage or on home buttom clearly check out there is on crystal ic try to clean with.

Akash 의 2017년 8월 29일

댓글 달기