평판: 21
1
Hello. I have recently replaced my motherboard after water damage, all lights are on, button lights work, but the screen wont turn on. The flex ribbon cable connector looks a bit funny, do i need to replace the whole LCD or can i just fix the connector?
좋은 질문 입니까?
평판: 14.9k
8
29
40
The photo provided is a bit blurry and hard to see the damaged pin. But if you can get it under magnification and get it back into shape without breaking it, there's a good chance you can get it working again if that is the reason it doesn't power up the screen. Also have a really close look at the Logic board to see if there was any damage there too.
해당 답변은 도움이 되었습니까?
https://imgur.com/a/DwuLf Thank, the logicboard is fine, i checked the pins they're good as its brand new
Great! Looks like if you get those pins straightened out ok, it'll save you a bundle on LCD Replacement
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 104
