기기를 수리하세요 커뮤니티 상점

2014년 9월 19일에 출시된 이 5.5” 스크린 iPhone은 iPhone 6의 큰 버전입니다.

1525 질문 전체 보기

옵션

Touch ID enabled but unable to read fingerprints

I transferred the original home button to the phone after replacing its screen. This is the new screen I used to repair the phone.

Everything seems to work, but Touch ID doesn't seem to be able to recognize fingerprints. When I go to "Add a Fingerprint" and try to add a new one, nothing happens. It doesn't respond to my old fingerprint when unlocking the phone, either. I also tried to reset all settings, but that didn't fix the issue.

I tried re-opening the phone and making sure all the connectors were firmly in place and not loose. I also transferred the metal backplate of the original home button in case it required that as well. Didn't make a difference.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 1개

Can I test the screen without putting the camera and sensors in?

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

First test the original display, to rule out that the home button and cable itself aren't damaged. Then test another new display, so see if the first new display is the actual issue. With these 6S and 6S+ displays it's not so easy to change the home button cable on the display

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

Hello iMedic,

I recently replaced my iphone 6s plus screen (iPhone 6s Plus LCD Screen and Digitizer Full Assembly /New / Fix Kit / White) ... and after following the guides here, there are a couple issues: 1) Phone seems to go in a power loop / reset. Always restarting, asking for passcode. 2) Touch ID is not reading any fingerprints, (fresh OS install, trying to add a new fingerprint).

I followed the advise of a few different threads, nothing seemed to work. Put on the old (original, cracked) display, and everything works perfectly.

Suggestions?

Thanks, Michael

의

댓글 달기

귀하의 답변을 추가하세요

Stephanie 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 7

전체 시간: 2,815