Skip to main content

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

316 질문 전체 보기

Issues with Home and Power Button

I replaced the glass digitizer. In the process accidentally ripped off the Wifi/Bluetooth antenna. I replaced that and the glass but for some reason when I reassembled everything, the home and power button are not functional (only to turn on but not to wake or sleep). The volume and mute button still work fine.

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

when you ripped of the antenna are you sure you didnt rip anything else off

의 답변

From what I can tell, no nothing else looks out of sorts. Would you like pictures to make sure I'm not over looking anything?

의 답변

의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

2개의 답변

가장 유용한 답변

if the volume buttons work but the power button does not you have likely torn through the cable on the top right hand corner of the iPad when letting the digitiser, it can be replaced following this guide..

해당 답변은 도움이 되었습니까?

점수 1

댓글:

The home button is not working either. Do you think I may have messed up something there as well? This is my first time attempting to repair an iPad. My apologies.

의 답변

의견 추가하세요

You can also turn off the lock/unlock feature by going to Settings - Display & Brightness - Then turn off Lock/Unlock. This should allow your sleep/wake button to work again.

If you want to actually fix that feature, you will need to replace the power/volume flex as rayeasom mentioned.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

jacob.v4 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 32