주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 5.5” 스크린 iPhone은 iPhone 6의 큰 버전입니다.

1498 질문 전체 보기

Touch ID not working after replacing home button cable

Hi, I recently replaced my home button cable after accidentally ripping the home button cable while replacing my phone's screen, I bought this part https://www.amazon.com/dp/B00XNA80Z6?ref... After successfully installing it, I found the the home button works too go home and things like that. However the touch ID does not work. Any suggestions?

Thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Unfortunately, only the original home button will work for TouchID. The home button and logic board are paired, so you'd have to replace both if you want TouchID functionality. Here's another discussion about it in case you're curious: Any possibility to replace Homebutton AND have Touch ID still working?.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

UPDATE: I just found this article that shows a glimpse of hope on the horizon (pun intended): https://ios.gadgethacks.com/news/after-e...

Oh I had thought since it was just the cable or would be fine

댓글 달기

귀하의 답변을 추가하세요

Monica Alexander 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 11

30일 전: 47

전체 시간: 5,606