평판: 13
4
I changed the display screen with new one, turned on and get a white screen? checked all connections, even plugged in broken screen and it still lit up on part of glass not cracked. any ideas?
좋은 질문 입니까?
평판: 13
4
The original screen had a small crack after falling off a desk and the bottom half of the screen was not working. Ordered a replacement screen and the replacement screen was faulty.
해당 답변은 도움이 되었습니까?
평판: 685.3k
3.4k
1.1k
2.6k
surely this is a software problem. Try starting up from an external USB device with a known good system on it. If it boots, run Disk Utilities from the external drive and see if that will do the trick.
해당 답변은 도움이 되었습니까?
평판: 5
1
Maybe you have not connected all the wires. If it is not of this then you will need programming pairing which only Apple does, and because you replaced the screen yourself they may not do it because it is Apple .
해당 답변은 도움이 되었습니까?
Never heard of that before. There is no programming a screen.
I like to see some validation of this programming pairing. Could you give us a link?
24 시간 전: 0
7일 전: 4
30일 전: 15
전체 시간: 212
댓글 2개
What happened with the previous screen to need a replacement ?
arbaman 의
Daughter dropped off desk and cracked the screen, ultimately had to send to Apple and was fixed
herrky 의