주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

Screen not working after home button replacement

Replaced 5s home button, but forgot to disconnect the battery before removing screen. After putting everything back together phone turns on, is recognized on iTunes but screen is not working. Baclight filter is not blown because there is nothing showing up on the screen even under a light source. Also battery started to act weird, it becomes dead in a few hours now while it's sitting on my desk.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 1개:

What do you mean by battery started to act weird? did it expand or burst? start fizzing? also for touch ID to work apple needs to replace it for you. only they have the tools to pair the touch id with a phone. and with the display blown did you connect all cables correctly? was any of the insulation over the ribbon wires frayed?

댓글 달기

답변 2개

Check your flex cables and do a hard reset if necessary

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Try to fix your issue with your iPhone 5. You need to check here. I hope this video help out you.

Fix iPhone 5 Screen Issue

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Elgar 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 38