기기를 수리하세요 커뮤니티 상점

2011년 10월 24일 출시 / 2.2, 2.4, 또는 2.5 GHz 쿼드-코어 Intel Core i7 프로세서

405 질문 전체 보기

옵션

Mac wont start up, both fans spin for 2 secs, Sleep LED blinks once

last 4 of serial # DV7L

When trying to power up with power button :

- Mac starts

- Both fans spin for 2 sec

- Sleep LED blinks once

- all shuts off, cycle repeats without pushing power button on

Battery indicator full. When I unplug battery with adapter attached, Mac wont react at all.

Tried different RAMs, HDDs, SSDs. Reseting SMC, NVRAM, 20sec battery unplug - no luck.

Any of you guys had smth similar with POST ?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 1개

Does the logic board show any signs of liquid damage?

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Disconnect the mag-safe, disconnect the battery. Press and hold the power button for 10 seconds. Reconnect battery, reconnect mag-safe and tell us if it booted.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 4개:

Tried it, disconnected Magsafe and battery, pwr button hold for 10sec. Reconnected Magsafe - fans spin instantly without pushing pwr button on. Pushing power button on, doesn't change anything.

No liquid damage visible.

의

It should have restarted spontaneously after doing that. Your repeated procedure is NOT the sequence I told you (what about the battery)?

의

tried it now, exactly as you suggested - no changes

의

I am at a loss on this one. I have never seen one that wouldn't boot with this method that didn't have liquid damage. Sorry, maybe @danj has an idea.

의

댓글 달기

귀하의 답변을 추가하세요

Hubert H. 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 3

7일 전: 6

30일 전: 8

전체 시간: 89