주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

Unveiled at the 2013 New York and Frankfurt auto shows, the second generation Soul is based on Kia's Track'ster concept.

3 질문 전체 보기

How do I identify which tire sensor has failed

My low tire pressure light on my dash went off. I checked my tires all are correctly inflated.

I'm trying to check if the four sensors are working properly and if one is bad any tricks in diagnosing which.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글:

@danj, do you have a spare tire? If so, that one has a sensor too.

No spare tire

의견 추가하세요

Nintendo Switch 키트

게임으로 돌아가기 위한 빠른 해결책

Nintendo Switch 키트 쇼핑하기

Nintendo Switch 키트

게임으로 돌아가기 위한 빠른 해결책

Nintendo Switch 키트 쇼핑하기

답변 2개

선택된 해법

As it turned out the battery in one of the sensors had died!

What a job to find which one, had to locate the ID string of the sensor using the test tool and then deflate the tires one by one to locate the ID printed on the sensor. Of course it took me three tires to locate the one in question.

Then I had to bring the car in to the dealer to explain why the sensor on that rim needed replacing. Luckily it was still under warranty!

It would have helped having the ID on the rim its self.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Some cars have sensors which don’t identify the specific tire, but simply indicate that one of the tires is low.  A Toyota Corolla is like that.  Other vehicles not only identify the specific tire, but also tell you the pressure for each tire.  A Chevrolet Trailblazer is like that.

A dealer told me that you can’t replace the battery in the sensor, but I’ll bet you can figure out how to do it if you can figure out how to take the sensor apart.  We have a questionable sensor on one of our vehicles; one day, when I get some time on my hands, I may try to check the batteries in the sensors.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Possibly, but possibly not.

On my Toyota Prius, one of the TPMS sensors had this exact problem, where the battery died, and the entire sensor had to be replaced because the entire internal gubbings of the sensor is completely filled with epoxy to ensure that it cannot be worked on by anyone, even the dealer.

의견 추가하세요

귀하의 답변을 추가하십시오

Dan 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 11

30일 전: 40

전체 시간: 494