주요 콘텐츠로 건너뛰기

Fourth generation Samsung Android tablets. Released in 2014.

360 질문 전체 보기

Cannot pair skullcandy with blue tooth

I have used my skullcandy crusher wireless headphones with my tab 4 many times. My headphones needed to be charged, so I did that. I tried to use them again and they didn't work. So I tried to pair them again. The tab would not recognize them as an available device.

A few days ago I had to reset the tab to the factory settings. This is the first time I tried using the headphones since the reset. Would that have caused a problem.

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

2개의 답변

가장 유용한 답변

I have encountered a similar problem and here's my solution;

  1. While the headphones are turned 'on' press and hold vol + and vol - at the same time , a blue light flashes.
  2. Turn off the headphones and turn them on again, now instead of a red, you will see a combination of flashing blue and red lights , this means it's in pairing mode
  3. Forget your headphones from previously connected devices list on your tab/phone/etc
  4. Re pair it
  5. Done.

해당 답변은 도움이 되었습니까?

점수 5

댓글:

Did the above trick, after a few tries i got working. Thanks alot !!

의 답변

Just changed phone..and the above worked!thank you so much!

의 답변

I did it and it works! Thanks!

의 답변

의견 추가하세요

You have tried to pair the headphone again after resetting the Tab ?

If not, you need to do that, because the bluetooth connection is not 'paired' anymore.

Usually you need to press some button long on the headphones to go into pairing mode.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

This was the best answer from all my searches. Solved the problem!

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Dave Gooding 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 41

지난 7일: 256

지난 30일: 1,147

전체 시간: 5,745