주요 콘텐츠로 건너뛰기

The Panasonic Lumix ZS50 is a small, lightweight personal travel camera, released in March 2015. The ZS50 features a long lens (30x zoom, 24-720mm), heightened low-light sensitivity, built-in viewfinder, and a 12.1 megapixel resolution.

7 질문 전체 보기

When I zoom in a little, the view becomes blurred.

At first, the view is in focus. After I begin zooming in very much (yes, I can hear the motor) the photo view becomes blurry. (I see 1.6 across the screen) If I try zooming back out all the way, the photo view stays blurry; however, if I turn off the camera and on again, the photo view again is clear until I try zooming in very much I have reset to factory and that did not change the problem. Yes, I am a novice.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

가장 유용한 답변

If your camera is on AF-S, half-press the shutter button to refocus. If it is in AF-C, it should focus automatically, but always half-press the shutter button before taking the picture to be sure the picture is in focus. Be sure pre-focus is on if your camera has that setting.

Here is the manual if you need any help:

ftp://ftp.panasonic.com/camera/om/dmc-zs...

Hope this helps!

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

Sara Thomas 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 118

전체 시간: 1,272