주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

1.6, 1.8, 또는 2 GHz G5 프로세서

163 질문 전체 보기

What does this error message mean?

Block Image

^Please see picture^

Whenever I turn on my IMac I either get this error message or the screen stays black and the yellow light blinks 3 times and pauses repetitiously. Please help!

UPDATE:

New Error message after removing one card of RAM

After I tried to remove the PRAM this error message occured.

Block Image

UPDATE!

New Error message

Block Image

This error message is more consistent and the computer now even boots up and makes the sound.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글:

Did you do what the screen said to do one the last photo you posted and type mac boot?

의견 추가하세요

Manta(만타) 드라이버 키트

112 bits for every fix.

Upgrade Your Toolbox

Manta(만타) 드라이버 키트

Upgrade Your Toolbox

답변 2개

선택된 해법

Try re-seating the ram or try taking out one of the ram sticks. If this helps then it needs new ram.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

I think that getting new RAM will fix this issue because I tried re-seating the RAM, and swapping their places and it gave me a different error code mentioning the RAM. I will update this when I get new RAM.

의견 추가하세요
가장 유용한 답변

That is called a Kernel Panic. It can be caused by either software or hardware failure. First thing to try is booting from you original system installation disk, go to the second page of the install to the pull down menu. Select Disk Utilities and see if you can repair your disk. Let us know your results or any changes please.

UPDATE 1/2/18

While you have the back off, inspect the capacitors (cans) on the logic board and see if any have expanded tops or show signs of leakage and/or corrosion.

해당 답변은 도움이 되었습니까?

점수 3

댓글:

I do not have the original installation disk. Is there another way without the disk? I think it's a RAM failure. Messing around with the RAM was giving me different error codes instead of a blank screen.

Try using just one stick of RAM. We're going to test both the RAM and the slots. Put the RAM in one slot and try. Then move it to the other slot and restart. Repeat with the other stick. Have you changed the RAM or configuration, i.e. tried an upgrade?

I have not changed the RAM and whenever I type mac re-boot it fails.

I'll update you on if just one stick of RAM works

의견 추가하세요

귀하의 답변을 추가하십시오

Caleb 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 110