Can I glue back the original digitizer of my Galaxy S3?

Question

Samsung Galaxy S III

Samsung Galaxy S3는 안구-추적 기능, 늘어난 저장 용량 및 무선 충전 옵션을 갖춘 멀티-터치, 슬레이트-형식 스마트폰입니다.

459 질문 전체 보기

Oscar @acsor

평판: 11

1

게시일: 2018년 1월 7일

옵션

Can I glue back the original digitizer of my Galaxy S3?

I'm venturing into the crazy idea of replacing my Galaxy S3 frame with a newer one, something which wasn't really necessary.

Yesterday I unglued the digitizer, and I saw the way it is glued to the "core screen" and the frame. Since the digitizer is still perfectly OK, can I glue it again on the newer frame? Do I need to buy a special glue for this operation, or am I better off purchasing a completely new digitizer? That is, how can I reuse this old digitizer, if possible?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

선택된 답변

Ben @benjamen50

평판: 159.8k

Mtwo Perform

11

191

368

게시일: 2018년 1월 7일

옵션

It's doable with Loca Liquid glue which you put between the glass and the LCD. There are videos on how to do this on YouTube.

https://www.youtube.com/watch?v=7hzCCsex...

해당 답변은 도움이 되었습니까?

예 아니요

점수 4

댓글 6개:

Thank you for the answer. With that I can continue to use my old digitizer, as long as I remove the old glue from both the screen layers, right?

Oscar 의 2018년 1월 7일

Old digitizer? Digitizer means touch screen and the touch screen is fused with the LCD.

The glass is just a piece of glass.

Yes you can actually use the screen without a piece of glass. If you are going to put a new glass on, make sure to remove the glue.

Ben 의 2018년 1월 7일

I did a research before this post on that term and it seemed that "digitizer" referred to the piece at the far right in my photo. Isn't it so?

Oscar 의 2018년 1월 8일

Well it isn't because digitizer refers to touch screen layer which would traditionally be fused with the glass.

But with these Samsung screens the touch screen layer is fused with the Samsung LCD display instead.

The glass you see on the right has no ribbon cable coming out of it indicating it is not a digitizer.

Ben 의 2018년 1월 8일

Thank you for the answer. Can it be called "front glass", or does it have a name at all, in the widespread jargon?

Oscar 의 2018년 1월 9일

댓글 1개 더보기

댓글 달기

Thank you for the answer. With that I can continue to use my old digitizer, as long as I remove the old glue from both the screen layers, right? — Oscar
Old digitizer? Digitizer means touch screen and the touch screen is fused with the LCD.

The glass is just a piece of glass.

Yes you can actually use the screen without a piece of glass. If you are going to put a new glass on, make sure to remove the glue. — Ben
I did a research before this post on that term and it seemed that "digitizer" referred to the piece at the far right in my photo. Isn't it so? — Oscar
Well it isn't because digitizer refers to touch screen layer which would traditionally be fused with the glass.

But with these Samsung screens the touch screen layer is fused with the Samsung LCD display instead.

The glass you see on the right has no ribbon cable coming out of it indicating it is not a digitizer. — Ben
Thank you for the answer. Can it be called "front glass", or does it have a name at all, in the widespread jargon? — Oscar

Samsung Galaxy S III

Can I glue back the original digitizer of my Galaxy S3?

답변 1개

귀하의 답변을 추가하세요