LCD not registering touch after screen replacement

Question

iPad 3 Wi-Fi

Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

154 질문 전체 보기

Ben Carr @darkneptune

평판: 13

1

게시일: 2018년 1월 8일

옵션

LCD not registering touch after screen replacement

I recently replaced the glass of an iPad 3 and for whatever reason... I cannot get it to register touch input. I've checked the cables and the white lines on the LCD flex cables seem to be flush on the connectors. I have hard rebooted the iPad several times - no change. There is a slight dent in one of the corners and I didn't know if it needs to be 100% seated to register touch.

P.s. This is a clients tablet and I really cant do a hard reset on it.

Thanks for the help.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 1개

ULEES @ulees 평판: 895 5 2 · Answer 1 · 2018-01-08T16:51:30-07:00

ULEES @ulees

평판: 895

5

2

게시일: 2018년 1월 8일

옵션

Hello,

was the screen tested before replacement? If yes and it worked remove it and send it back to the manufacturer/supplier if he accepts money back on returns or assurance that would be great. If you can talk to the supplier/manufacturer try and get a replacement. I don't find any other solution.

Also this might help it did my still don't know how or why. I had the same problem with the Samsung Galaxy J7 2016 it didn't register touch input. All I did was connecting a converter from phone port and normal USB and plugged mouse slid left and right and just like that it worked (i just wanted to copy files to an SD card so I don't lose files if something goes wrong). Just happy it worked "happened last week"

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 2개:

the screen did work before the replacement. I just replaced the glass, not the actual LCD

Ben Carr 의 2018년 1월 8일

Then you probably used too much force to get the glass back on.

ULEES 의 2018년 1월 9일

댓글 달기

iPad 3 Wi-Fi

LCD not registering touch after screen replacement

답변 1개

귀하의 답변을 추가하세요