Why is my phone screen so dim in the light but works good in the dark?

Question

iPhone 6s

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2694 질문 전체 보기

Tiffany @tiffjo11

평판: 59

3

1

게시일: 2018년 1월 11일

옵션

Why is my phone screen so dim in the light but works good in the dark?

I had a cracked screen so I replaced the screen, I’ve done this multiple times with no issue. This time I thought the screen wasn’t working but I could hear the clicks and vibrate so I knew the phone wasn’t dead. I went into my room and the lights were off so it was completely dark and then the screen was on, I thought it was then fixed so I turned on the bedroom light and the screen went back to extremely dim so you can’t see anything again. I turned the light off and turned the phone back on and the screen was bright. What would cause this?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 4

댓글 달기

답변 4개

선택된 답변

Ben @benjamen50

평판: 159.8k

Mtwo Perform

11

191

368

게시일: 2018년 1월 11일

옵션

Either ambient light sensor faulty but looks like it is working in your case.

It's to do with the screen where the ambient light sensor sits in.

The part is usually the pink rectangle square that is covered with a black rubber gasket next to the proximity sensor on the front camera assembly.

Anyway you can just turn off auto brightness instead of trying another screen or fixing it.

You can turn off auto brightness in settings, general, accessibly, display accomodations, auto brightness or somewhere near there.

If the black gasket is missing, the ambient light sensor may be too sensitive as it is taking in more light than usual.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 7개:

So I turned the auto brightness and it worked but as soon as I adjusted the brightness it went right back to extremely dim and now I can even get it bright enough to see it in the dark. Think it’s done?

Tiffany 의 2018년 1월 12일

The replacement screen is most likely defective.

It shouldn't be possible to get the screen so dark that you can't see it in the dark.

Ben 의 2018년 1월 12일

I was thinking that. I can get a quick flash and then it’s gone

Tiffany 의 2018년 1월 12일

So i put this screen on my other phone and its fine, so its the phone, what part of the phone would cause this problem

Tiffany 의 2018년 1월 12일

Backlight circuit gone bad, to be specific the backlight driver is failing and needs to be replaced by someone that does microsoldering.

Ben 의 2018년 1월 12일

댓글 2개 더보기

댓글 달기

So I turned the auto brightness and it worked but as soon as I adjusted the brightness it went right back to extremely dim and now I can even get it bright enough to see it in the dark. Think it’s done? — Tiffany
The replacement screen is most likely defective.

It shouldn't be possible to get the screen so dark that you can't see it in the dark. — Ben
I was thinking that. I can get a quick flash and then it’s gone — Tiffany
So i put this screen on my other phone and its fine, so its the phone, what part of the phone would cause this problem — Tiffany
Backlight circuit gone bad, to be specific the backlight driver is failing and needs to be replaced by someone that does microsoldering. — Ben

Phillip @frito 평판: 25 1 · Answer 1 · 2019-12-15T11:09:16-07:00

Phillip @frito

평판: 25

1

게시일: 2019년 12월 15일

옵션

Screen so dark can't see to adjust is there a auto reset or remove battery to reset screen?

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 달기

Truckguy @thatonetruckguy 평판: 762 11 11 1 · Answer 2 · 2018-01-12T15:05:21-07:00

Truckguy @thatonetruckguy

평판: 762

11

1

게시일: 2018년 1월 12일

옵션

Your auto-brightness is enabled. Try looking in settings for a setting called like Automatically change brightness or Auto brightness, etc. Look in display settings, and it should be there.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기