주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 5.5” 스크린 iPhone은 iPhone 6의 큰 버전입니다.

1456 질문 전체 보기

LCD shield plate screw size

The tools list for the 6 plus screen replacement guide specifies a phillips #000 screwdriver, but I’ve seen many sources (including the ifixit guide) that indicate #00 sized screws for the LCD shield plate. I can't get these screws out. Can someone please confirm for me the actual size of the LCD shield plate screws? Also, I see the screwdrivers come in a blunted tip and a pointy tip version. Which should I get?

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

Hello,

you need Phillips #000 Screwdriver. You can buy it at Ifixit and if you buy tools from Ifixit you gain lifetime warranty and for phone parts it's mostly 1 year. So if you are buying i advise Ifixit (links below). Also link for iPhone 6 LCD Shield Plate Replacement.

iPhone 6 LCD Shield Plate Replacement:

iPhone 6 LCD Shield Plate Replacement

Phillips #000 Screwdriver:

Phillips #000 Screwdriver

Or the whole toolkit:

Essential Electronics Toolkit

Phillips #000 Screwdriver 이미지

상품

Phillips #000 Screwdriver

$8.99

Essential Electronics Toolkit 이미지

상품

Essential Electronics Toolkit

$24.99

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Thank you. I would still like to get feedback from others as there is conflicting information on this site.

의 답변

136 users completed this guide and for all of them it worked.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Sidney Burton 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 4

전체 시간: 755