주요 콘텐츠로 건너뛰기

Released November 1996, also known as the 5th generation Honda Prelude.

2 질문 전체 보기

Why is 3rd piston not reaching top dead center

i have a 98 honda prelude 2.2l vtec base model w/ stock h22a4 motor i blew a head gasket and im in the middle of replacing the head gasket i just got the head back from the machine shop and im cleaning the deck on the block and taking a look at the pistons as i rotate the crank i notice that the 3rd piston wont come to top dead center is this an issue as meaning there is another problem i took compression test to determine head gasket blew and my readings where 50 psi at cylinder 3&4 and 1&2 were stable at 150 if this info helps

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
의견 추가하세요

Apple Watch Kits

Screen and battery repairs just got easier.

지금 장보기

Apple Watch Kits

Screen and battery repairs just got easier.

지금 장보기

2개의 답변

Hi Ronnie,

I also own a Honda Prelude the exact same model as yours - love the car heaps. An absolute pleasure to own and drive!

Am also retired auto mechanic, seems like you may have a problem with that low piston, could be anything from a blown crank big end bearing to a broken piston pin. Without more info, not easy to diagnose.

A few questions needing answers -

Did the motor ever get overheated or run out of oil or stop quickly?

Did you hear any unusual knocks or rattles from the engine when it last ran?

Was the head gasket actually blown between 2 & 3?

If you send me your email address I can forward a copy of the workshop manual for your car!

Hope this helps...

Cheers,

ausmec101

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Ausmec101,

Hello, I have a 98 prelude. Would you please send me a copy as well.

Thank you!

Kenfoddrell49@gmail.com

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Ronnie Shedd 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 12

전체 시간: 355