주요 콘텐츠로 건너뛰기

3MB 공유 L3 캐시 1.8GHz 듀얼-코어 Intel Core i5 (Turbo Boost 최대 2.8GHz)

371 질문 전체 보기

MacBook air 13":install new battery, smoke near charge port, then died

My macbook spontaneously died two years ago, it wouldn't charge, the magsafe green light wouldn't turn on when plugged into the computer, so I waited until I could get a new battery. I recently got a new battery, I installed it pretty easily, and it turned on, it had a residual 12% charge on the new battery! I decided to charge the battery because it was low, but when I did, almost immediately after plugging it in (the magsafe green light lit up for the first time since it died years ago), it started to smoke near the charging port--then it shut off and the screen turned black. I disconnected the charger, I tried unplugging the new battery and plugging it back in, but to no avail, it won't turn on. I don't know what it is, I'm not a computer expert and it's kind of old, I have no clue what's wrong with it. For a moment when I installed the new battery, it worked perfectly, it wasn't until I plugged it in did things go south. My magsafe is a 60W, the original one that came with my computer. Help!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Sounds like you had a short in either the MagSafe connector or the I/O board. Review this Apple T/N to make sure your MagSafe adapter is in good shape: Apple Portables: Troubleshooting MagSafe adapters Make sure the cable is not damaged or has any twists (bumps) as it can short out.

Within the system you'll likely need to replace the I/O Board. Follow this IFIXIT guide: MacBook Air 13" Mid 2012 I/O Board Replacement and here's the needed part: MacBook Air 13" (Mid 2012) I/O Board

MacBook Air 13" (Mid 2012) I/O Board 이미지

상품

MacBook Air 13" (Mid 2012) I/O Board

$89.99

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

Becca Lee 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 7

전체 시간: 1,200