주요 콘텐츠로 건너뛰기

The JBL Charge 3 can be recognized by its distinct woven speaker cover and rubber accents. It was released in 2016 and features a fully waterproof design, 20 hours of playback time, and bluetooth connectivity.

83 질문 전체 보기

Battery indicators always lit

Hello, recently I got JBL Charge 3 bluetooth speaker. Everything is fine except one thing. Battery indicators are always on. All 5 of them. Even in the JBL Connect there's always full bar. I was using it all day and when I came home I charged it. When I put it to electricity only 2 leds were lit and third was blinking. After some minutes all 4 leds were lit and 5th was blinking. The 5th led is blinking endlessly.. Everything works fine except the indicators... I will try to completely drain its battery and recharge it and I'll also try resetting it(power button and volume down). When I got it, it was charged to 4 leds and it was draining( only 3 leds left after some time). I put it to charge and I updated the firmware and leave it to charge. After some time the 5th led was still blinking endlessly but when I took off the charge cable it had 5 leds lit, those were still lit after 3-4 hours of usage...

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2

1 Comment:

Received my NEW JBL Charge 3. When I initially plugged it in for its initial charge there were no status lights lit which tells me the battery arrived with a totally dead battery and it may have expired on the shelf.

The speaker was ordered 25 Nov, Order# 114-0467390-0395426. I’ll bet the battery is new and bad on the shelf. Please inform me on complete replacement of a new battery and replacement instructions. Thank you Bill Martin, Luverne MN

댓글 달기

답변 3개

Hello. I had the same problem with a JBL Pulse 3.

I even went to the store where I bought it to replace it (which was kindly done by the salesperson) because I read somewhere the problem was a battery problem.

I charged the "new" unit with the same "defect", but..

But I solved it simply by upgrading the firmware, done through my cell phone.

That was it. No more 5th led blinking eternally.

해당 답변은 도움이 되었습니까?

점수 0

1 Comment:

How to upgrade the firmware?

댓글 달기

I already updated the firmware. Nothing was wrong with it.. The 5th led just takes too long to charge.. The first 4 leds take about 20 min each, but the third one takes around 2-3 hours. I thought it has defect because I used it for like 2 hours and it still had 5 leds on. When I charged it suddenly had just 3. But now it work fine. Thanks for the answer though. :)

해당 답변은 도움이 되었습니까?

점수 0

1 Comment:

How to upgrade the firmware

댓글 달기

my jbl charge 3 is charging for over 4 hours and its still on the 1st led.

what do i do??

해당 답변은 도움이 되었습니까?

점수 0

1 Comment:

Get a better charger.

댓글 달기

귀하의 답변을 추가하세요

Josef 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 10

30일 전: 32

전체 시간: 15,926