기기를 수리하세요 커뮤니티 상점

Model A1224 / Mid 2007 및 Early 2008 / 2, 2.4, 또는 2.66 GHz Core 2 Duo 프로세서

548 질문 전체 보기

옵션

Can I move the factory-installed HD to the optical drive bay?

iMac Intel 20" 2210

I want to upgrade from the stock configuration to 1 SSD and 1 HD.

The current drives are stock - the HD is an Intel ICH8-M AHCI; the optical is a Matshita UJ-875 (ATAPI interface). To get the best speed from the new SSD, I am thinking of replacing the HD with the SSD, and then (if possible) moving the HD to the current optical drive bay. Is this possible? Will there be a performance problem with the HD due to the optical drive's interface? Should I be thinking of a different approach?

Thanks,

Wes

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Here;s an optical bay hard drive adapter: [연계 제품이 누락 또는 비활성화 됨: IF107-079]

I've had fewer problems just putting the replacement hard drive in the bay and leaving the original drive in place.

Here's how to do it: iMac Intel 20" EMC 2133 and 2210 Optical Drive Replacement

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

Thanks for the help!

의

댓글 달기

옵션

Reopening an old thread here.

I was just gifted a 2008 24" 2.8 iMac with 6gb RAM. It works great for my needs (internet, Word processing, light photo editing), but I have a 120GB SSD from an old PC that I would like to swap into the main drive slot, then add a 1TB drive for storage in the Optical Drive slot.

In hte product description, it reds you can swap up to a 1TB drive. Is this true? It will not accept a 2TB 2.5" drive? Is this a limitation of the PATA connection?

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

wb5876 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 2,261