주요 콘텐츠로 건너뛰기

신발 수선 및 관리를 위한 안내서, 귀하의 신발을 깨끗한 상태로 유지하십시오.

36 질문 전체 보기

How do I get rid of the stickyness on the sole of safety shoes

I've had safety shoes in a box for years, when i looked at them the soles were stuck to the side of the box and had black goo lines on the box. Now the soles are all sticky. I've never used the shoes and thought someone could and wanted to donate them but i don't know how to get them un-sticky, i hate to throw them out!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 3개

가장 유용한 답변

The soles were probably made with some type of polyurethane. When stored for long times, especially with higher humidity present, the PU can undergo hydrolysis which will make them sticky and gooey. There is not much that can be done to fix...as the damage is done in the actual makeup of the sole. You could attempt to make them usable by dusting them with corn starch or talcum powder and seeing if it makes them acceptable.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

I hear baking soda with water may remove some stickiness.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

You cannot 'un-sticky' them. It is due to a chemical reaction called 'hydrolysis'. The polyurethane sole absorbs water when not worn for long time periods and disintegrates. The only thing you can do is replace the soles, discard the shoes, or contact the manufacturer. I had a pair of Blundstone boots that developed this problem. The company sent me a new pair.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

gkbova 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 21

7일 전: 124

30일 전: 430

전체 시간: 16,543