주요 콘텐츠로 건너뛰기

The DualShock 4 CUH-ZCT2 was announced in 2016 to replace the CUH-ZCT1 controller released in 2013. This controller is similar to the previous model.

268 질문 전체 보기

Will the JDS-040 fit on my ps4 controller when mine has JDS-050?

My Controller model is CUH-ZCT2U and the model of the port is JDS-050 so i wanted to make sure before i bought anything that might not fit, and if i do need JDS-050, where could i find one ive looked everywhere but i cant find it.

JDS-050:

Block Image

Block Image

JDS-040:

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 달기

답변 2개

가장 유용한 답변

I am in the same boat, need a jds-050 usb board and all I can find is the jds-040 board.. I'm gonna just order that one, the pin connectors are the same and had seen a wire diagram where they match the same, I am thinking the jds-050 was either an upgraded board or maybe a differnt manufacturer.

해당 답변은 도움이 되었습니까?

점수 1

댓글 3개:

Same problem. Already tried a jds-040 board. It is not compatible.

so either buy a new controller or wait till they release the jds-050 to consumers

I have a CUH-ZCT2U (5th gen) and my controller has a JDS-055 board. My controller works when connected to USB but will not charge. I bought a JDS-040 board by mistake. The JDS-040 can be installed in the controller but the ribbon connector is on the other side and requires the ribbon cable be twisted to make it work. The JDS-040 does allow the controller to work over USB and the lights work but still not charging.

댓글 달기

Kindly check Alibaba. They have tons of replacement parts for JDS-050 and all other port versions.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

BurnedSpaghetti 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 19

30일 전: 86

전체 시간: 6,320