주요 콘텐츠로 건너뛰기

Guides and repair information for coffee and espresso makers from Jura Elektroapparate AG, a Swiss developer and distributor of home appliances.

102 질문 전체 보기

Re-assembled Jura Impressa F50 - Loud Noise at end of cycle

I replaced the drainage valve in my Jura F50 machine and it now makes coffee :)

Unfortunately it also make a very loud noise as if something is stuck at the end of the coffee making cycle. Its almost certainly something I have done wrong in re-assemble but everything seems to work (Coffee good, coffee grind where it should be and no obvious leaks etc.) Any ideas on what this might be?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 1개

The problem actually seems to be worst when a clean is done after switching the machine off. The loud noise goes on for some time and the machine resets rather than turning off (Next attempt to power it off immediately powers it down)

댓글 달기

답변 2개

가장 유용한 답변

Feeling kinda foolish now. All I had to do was let it complete one cycle without the coffee grind bin in place (Tray in but collection bin out). Must have been out of position but now its ok.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

Exact same problem, also with an F50, and your easy fix worked a treat!

5 years later almost to the day, thank God for internet!

Robert Dunkley, you’re a gem🙏🏻

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Robert Dunkley 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 18

전체 시간: 1,317