기기를 수리하세요 커뮤니티 상점

The Dyson Ball Multi Floor Upright Vacuum was released in 2012 and can be identified by the Dyson tag DC40. It is very similar in design and mechanical operation to its earlier counterpart, the DC41 Animal.

20 질문 전체 보기

옵션

Why is my Dyson multi floor ball not sucking when I cleaned it out

My Dyson Ball multi floor is not sucking I went through the entire thing did not find any clogs that I pull off the the catcher the round tube and clean the filters out of that clean the HEPA filter pulled the side of the ball often see anything cotton that filter went through all the tubing and didn’t find anything in there it turns on and the brushes flick but it’s not sucking from the front side sucking from the top side so it’s sucking out we’re supposed be blowing in

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

there is a hose in the ball that moves from wand to floor attachment when the handle is moved from parked to push position.

the hose sometimes hangs, or fails to complete its motion from one vacuum seal to the other.

i am here trying to find out why that is happening, before i have to go behind the filter in the ball

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

I am also having this issue, except there is a visible hole in the small flip flop hose on my vaccuum. I can repair the hose but how do I get to it?

의

댓글 달기

귀하의 답변을 추가하세요

luker6878 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 11

30일 전: 61

전체 시간: 4,134