주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

Phone screen not working

The screen is black but is still lit up when I press any button, I can still press things and I hear it responding like when I touch it to put the passcode. It makes the key noises. But the screen won’t display anything. How can I fix it at home

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

You tried Resetting the device obviously i assume.

Was it dropped? Did it go into water? Was it bent?

Sounds like a bad screen, There should be guides, and i believe the tools you would need to replace the screen on this site here.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

can you tell us what you were doing prior to the black screen? Is the phone hot? is your phone damaged in anyway (software - memory at full capacity, outdated firmware, hardware - dropped it, used a really really off brand charger that messed up the motherboard)

If you want to fix it at home, I would first plug it in your computer and check on itunes to see if your computer recognizes your device. If so, back it up and do a factory reset or restore it to a previous time when your phone was working.

if neither of these work, open up your phone and check the screen digitizer circuits and your battery. what do i mean by battery? you could have a faulty battery (therefore it’s swollen and beginning to press up against the motherboard, causing issues)

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

daphne morffi 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 33