AK PRO 5 in1 Laminating Machine Bubble Problem
Hi Everyone.
I bought AK PRO 5 in 1 for Laminate iPhone Broken LCD.
The problem is the Bubble.
I try it with same Parameters suggest form reseller, but the problem is same.
I change the temperature do different setting but the problem is same.
Is someone use a same machine who suggest me something…
The setting I use is :
Vaccum Time : 15 SEC
Lamination Time 15 SEC
Outgassing Time : 5 SEC
Debubbling Time : 6000, SEC
Temperature : 40 C.
The Modul who i use when i put the LCD inside the machine black (check the PIC)
Thanks
좋은 질문 입니까?
I
have same problem but i use 4in1 glasses and i always get pressure bubbles. Any ideas why ? I use same akpro.
arnasseip 의
I have the same problem with Ak pro. Always I have bubbles, with frame, without frame, 3 in 1, 4 in 1. I don’t know why. Thanks to any recommemdation
David Alonso 의
I am having problems with my AK pro machine, it no longer lock and there is no pressure in the machine
Collins Ilondu 의
perhaps you have problem whith inside pump
Marco 의